Once an animal is registered in either the Breeding Register or the Commercial Register, it is assigned a Wagyu classification based on its Wagyu content. Classification is determined through recorded pedigree information, supported by DNA parent verification and/or Wagyu Content Check (WCC) testing where pedigree information is unavailable.
Base Animals
Base Animals have no pedigree information recorded or have been tested through WCC and determined to contain less than 50% Wagyu content.
This classification is commonly used where parentage cannot be identified through DNA testing or where members are establishing a herd using animals of unknown Wagyu breeding.
Grades 1-4
Animals classified from First Cross (F1) through to Fourth Cross (F4) possess increasing levels of Wagyu content. These classifications may be determined through recorded pedigree information or assigned based on Wagyu Content Check (WCC) results where pedigree information is unavailable.
These animals are referred to as Crossbred or Content Wagyu as they contain a proportion of non-Wagyu ancestry and do not meet the requirements for Purebred or Fullblood classification.
Purebred
Purebred animals represent the final stage of the grading-up process. While they contain a very high proportion of Wagyu genetics, they can be distinguished from Fullblood animals by the presence of recorded non-Wagyu ancestry within their pedigree.
To be classified as Purebred, an animal must:
- Contain at least 93.75% Wagyu content.
- Be parent verified to a registered sire and dam.
- Have recorded non-Wagyu ancestry within its pedigree as a result of the grading-up process.
Fullblood
To be classified as Fullblood, an animal must:
- Trace its pedigree entirely to the original Japanese foundation animals.
- Have no recorded non-Wagyu ancestry within its lineage.
- Meet all AWA pedigree and registration requirements for Fullblood classification.
Grading up through Pedigree
Animals bred to higher-grade Wagyu or Fullblood animals may produce progeny with increased Wagyu content. Over successive generations, this can result in offspring progressing through the Wagyu grade classifications.
Determining Grade through DNA Testing
While Wagyu content generally increases through successive generations of breeding to higher-content Wagyu animals, genetic inheritance is not passed on in exact proportions.
As a result, Wagyu Content Check (WCC) testing can be used to estimate an animal’s Wagyu content and assist with grade allocation, particularly where pedigree information is incomplete or unavailable.
For further information, visit the Wagyu Content Check page.
Grading Table
The table below outlines the Wagyu grade classifications and the requirements for each grade.
Table 1: Grade Code Assignment Based on Generation or Minimum % Wagyu Content
| Grade | Generation | Min. % Wagyu Content | Grade Code in Ident |
| 0 | 0 = Base Animal | < 50% | 0 |
| 1 | 1 = Crossbred Wagyu F1 | 50% – < 75% | 1 |
| 2 | 2 = Crossbred Wagyu F2 | 75% – < 87.5% | 2 |
| 3 | 3 = Crossbred Wagyu F3 | 87.5% – < 93.75% | 3 |
| 4 | 4 = Crossbred Wagyu F4 | > 93.75% | 4 |
| PUREBRED | Purebred | 93.75% + and Parent verified to sire and dam. | P |
| FULLBLOOD | Fullblood | Parent verified to fullblood registered dam and sire. | F |
Animal Association ID Format
To ensure consistency and make animals easier to identify within the Helical database, the AWA uses a standard Animal Association ID format. Members should note that the format changed on 1 January 2022.
Animals Born Before 1 January 2022
Animals born prior to 1 January 2022 are identified using the following format:
[Member Identification] [Grade] [Year Letter] [Drop Number]
Example: AWAFS123
Animals Born On or After 1 January 2022
Animals born on or after 1 January 2022 are identified using the following format:
[Member Identification] [Grade] [Year Code] [Drop Number]
Example: AWAF22T123
A list of Year Codes can be found here.